Downloads |
Product Specifications | |
General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. | |
Microprocessor Control | Viewing Door Small Foot Print Stainless Steel Interior (GI Series Only) UL Approval 24 Month Limited Warranty |
Features | |
Weight
| 425 lbs 12 cu.ft. 20 x 20 x 26 each chamber (51 x 51 x 66) 25 x 27 x 74 (64 x 69 x 188) 8°C above ambient to 70°C +/-0.35°C at 37°C Volts: 120V Hertz: 50/60Hz Watts: 650W Amps:5A Air 6 Supplied (24 Maximum) Yes One each |
Temperature Range | 8°C above ambient to 60° |
Capacity | 11.7 Cubic Ft. / 332 Liters |
Dimensions | ▼ |
Exterior w x d x h (inches) | 25.3” x 27.3” x 76.0” |
Exterior w x d x h (cm) | 64 x 69 x 193 |
Interior w x d x h (inches) | 19.5” x 20” x 26” |
Interior w x d x h (cm) | 49 x 50 x 66 |